- Sintered PTFE Solid Porous Rod
- 2017-12-25 03:08
- PTFE sintered filter is made of pure PTFE raw materials, sintered in high temperature and pressure stove. The filter has a high acid and alkali resistance capacity. The strength and toughness of filter are high and they can work in high temperature up to
- High Flow Bag Filter Cartridges for Replacing Filter Bag
- 2017-12-11 18:31
- Tanvi bag filter cartridges are high flow capacity, high efficiency, inside to outside flow, liquid filtration pleated bag replacement cartridges, designed for applications with large flow requirements. By increasing the surface area in original baskets a
- All Polypropylene High Flow Filter Cartridges
- 2017-10-11 18:48
- Tanvi TVM series high flow filter cartridges are designed for providing higher flow filter element with compact housing for users.The construction of the high flow filter permits flow rates of up to 750m3/hr in a single cartridge, so it is equivalent to 1
- PP String Wound Filter Cartridge
- 2017-10-11 10:23
- String Wound Filter Cartridges are used for Prefiltration for water purification,Coarse filtration for all kinds of beverage and wine;Prefiltration for microelectronic and medicine industries;Clarification for sewage treatment
- 40 Inches High flow Filter Cartridges for Water Treatment
- 2017-10-09 19:04
- The Tanvi high flow filter cartridges are unique pleated geometry, they are large-diameter, coreless, single open-ended, pleated cartridge with an inside-to-outside flow pattern. It is designed for high flow filtration. Benefit from filters high flow and
- SS304/SS316 Electropolished Tri-Clamp Sanitary Gases Filter Housing
- 2017-09-30 06:14
- Tanvi filter housings for gases are designed to meet the requirements of the bioparmaceutical industry.All 316L or 304 stainless steel construction with polishing offers excellent cleanability features. There is a sanitary drain valveensuring proper liqui
- PP/PES/PTFE/Nylon Syringe Filters
- 2017-09-17 01:46
- Syringe filters are usually used in laboratory because they are small and user-friendly. Syringe filters can be used for samples pre-filtration,clarification, removing of particulate matter and fluid and gas sterilization and so on. Tanvi syringe filters
- 0.22/0.45 Micron Gas Sterilization PTFE Membrane Filter
- 2017-09-15 16:59
- Gas filtration, strong corrosion, strong oxidation, organic solvents, strong acid, strong base liquid filtration Pharmaceutical industry: for water injection, infusion and antibiotic industry air sterilization filter.
- 131mm LCD Display Pleated Filter Cartridge
- 2017-08-23 11:37
- Tanvi big fat filter cartridges are specifically designed for the wet cleaning applications in Thin Film Transistor Liquid Crystal Display (TFT LCD) manufacturing. The filters have excellent compatibility with the various process liquids. The unique cartr
- Sintered PE with ACG Solid Porous Rod
- 2017-08-19 01:45
- PA sintered filter is a type sintered filter that is made of high molecular weight polyethylene and activated carbon particles. In the production process, adhesives dose not be used, it inherits the excellent characteristics of PE material with a wide ran
- PP Melt Blown Filter Cartridge
- 2017-08-16 19:01
- Melt-blown filter cartridges are made of polypropylene with the manufactural process: melting, spinning, drawing, receiving. Manufactural process lead PP fibers to interpenetrate and form winding path microporous structure.The fiber density along the dire
- Hydrophilic Nylon6 Or Nylon6,6 Membrane Filter
- 2017-08-13 10:53
- Liquid clarification and sterilization and particle filter; a variety of solvents and liquid filtration; photoresist filter in the electronics industry; ink terminal filter.
- Sanitary Grade Vent Filters
- 2017-08-06 18:23
- Tanvi sanitary vent filter housing heater are designed entirely according to GMP standard and consists of a stainless steel vent filter, a filter housing heater and a temperature controller. The thermal characteristics of vent filter housings must be tigh
- SS Shell Vent Filters
- 2017-07-14 17:49
- Filter heater, respirator heater is designed in accordance with the requirements of GMP, which consists of flexible heating and temperature control box temperature control box composed of two parts. Mainly used for the filter housing to provide heating. I
- Sanitary Electropolished 316L Fluid Filter Housing
- 2017-07-13 14:57
- Tanvi sanitary filter housing is mainly made of SUS304 or SUS316L with pleated membrane filter cartridge as filter element. Streamlined structure assure no cracks and no dead angle. Surfaces are polished to minimize the risk of contamination. The filter h
